Sprinter Camper Van Roof Rack Options

As an Amazon Affiliate, EXPLORIST.life earns from qualifying purchases.

Over the last few years, the options for adding a roof rack have grown substantially. In the ‘beginning’ of the Sprinter camper conversion craze, there was, really, only one option for good looking and highly functional roof racks. In this blog post, I’m going to outline all of the options available for adding a roof rack to a Sprinter camper van conversion.

*If you have a lead on other Sprinter roof rack options that I’ve left out; leave a comment at the bottom of this page and I’ll check it out*

Flatline Van Co

Flatline Van Co has multiple different options for Sprinter roof racks, but most of them focus around a flat siderail with 8020 extrusion lateral braces. This makes for a super low profile and lightweight roof rack:

The flat siderails have plenty of holes for attachment points for things like light, awnings, ladders, etc

Click Here to Shop all Flatline Van Co Sprinter Roof Racks

Yakima LockNLoad

Sprinter Roof Rack – Yakima LockNLoad

This roof rack system has been available and getting a proper thrashing in the Australian outback for a few years at this point. This fall (2019) it will be released into the US market…

…and This. Rack. Will. Be. A. Game. Changer…

Yakima LockNLoad Roof Rack

It’s made of lightweight, corrosion-resistant aluminum like most of the racks on this page but the unique part about the Yakima LockNLoad system is found in its T-Slot system:

Yakima LockNLoad T-Slot System holding down Fuel Canisters

The Yakima LockNLoad features slots on all of the crossbars and on the top and outside of the outer loop of the roof rack. This means that you can attach solar panels, bike racks, cargo boxes, shovels, RotopaX fuel containers, high lift jacks, auxiliary lights, awnings, road showers, traction boards or really anything else you could possibly think of to this rack WITHOUT needing to drill additional holes in the rack.

Tie-down whatever you want… wherever you want.

And since the T-Slot system allows it to be totally modular, the accessories can be removed, or moved to a different location on the rack depending on your needs (or season).

Bike Mounts on a Yakima LockNLoad Roof Rack

This roof rack also comes in six different sizes so you can place them between roof vents as needed depending on your setup.

Yakima LockNLoad Roof Rack Sizes

I’ll update this post to include pricing once this system if officially launched in the US, but the pricing is going to be in the $729 – $979 ballpark depending on which size you need. In the meantime, you can find more information here: Click Here to Shop Yakima LockNLoad Platforms

Van Go Outdoors Sprinter Roof Rack

Expedition Style Sprinter Roof Rack

Van Go Outdoors is based out of St. Augustine Florida and has been in the custom vehicle and fabrication game for over a decade. Their racks are made from lightweight, corrosion-resistant aluminum with stainless steel mounting hardware.

The roof racks from Van Go Outdoors are very flexible/modular in nature. What I mean is, the crossbars can mount to the outer loop in virtually any position. Inside of the outer loop of the roof rack, there is a continuous piece of angle with holes every few inches so you can bolt the cross bars in any location you like to accommodate for roof fans, air conditioners, etc.

Sprinter Roof Rack featuring Modular Cross-Bars

All of the vertical supports between the top and bottom rim hoops have a 5/16″ hole drilled in them so you can mount awnings, auxiliary lighting, shovels, road showers, or anything else you need mounted on the outside of the roof rack.

These racks come in two different styles. The “expedition style” features a turned down front rail which is perfect for mounting some big beefy round lights (or a light bar… just whatever you like, really):

Van Go Outdoors Expedition Sprinter Roof Rack

…and the “touring style” is a more sleek front-end look:

Van Go Outdoors Sprinter Touring Roof Rack

These roof racks are priced anywhere from $1540 – $2375 depending on the size and extra features. Shipping is currently unavailable and would need to be picked up directly from, or just have them install it for you at Van Go Outdoors in Florida.

You can find more info, pricing, and contact info about the Van Go Outdoors roof racks here: https://store.freedomvango.com/collections/bumpers-racks-light-mounts-and-more/products/roof-rack-by-freedomvango

Aluminess Modular Sprinter Roof Rack

Aluminess Modular Sprinter Roof Rack

This roof rack has many different configurations and can be incredibly modular in terms of openings to allow for roof vents, air conditioners and such. It’s a bit hard to put into words, so, fortunately, they have a video to show how this roof rack sets itself apart from

Aluminess roof racks are extremely popular in the Sprinter Camper Conversion community. They got their start making custom roof racks, but now have an option for a more modular, off-the-shelf type of roof rack.

YouTube player

These Aluminess modular roof racks are $2,795 – $3,700 depending on the length of your van and includes shipping.

For more info, specs, details, and to find out about production/lead time; visit: https://www.aluminess.com/mercedes-sprinter-modular-roof-rack/

Aluminess Custom Sprinter Roof Rack

Aluminess is based just outside of San Diego CA is one of the more commonly used roof racks on Sprinter camper van conversions. They use lightweight Aluminum for their roof rack builds and are HIGHLY custom in nature.

If you have roof vent fans or an air conditioner you are needing to work around; Aluminess will custom cut-out the openings to fit your needs.

Aluminess finishes the ‘floor’ of their roof rack with a few different methods but slats and perforated aluminum sheet are the two most popular.

DIY Campervan solar

The highly custom nature of these racks definitely means you should contact them ahead of time before you purchase to make sure everyone is on the same page (and check to see how long production will take and shipping will cost).

These roof racks cost anywhere from $2,700 – $3,800+ plus shipping. Shipping costs can vary GREATLY (anywhere from $300 to $1,000) depending on your location. Production times also vary greatly; anywhere from a few weeks to as much as 6 months. You can find more pictures, contact info, prices, and more info about the custom sprinter roof racks from Aluminess here: https://www.aluminess.com/sprinter-roof-rack-build/

Roambuilt Custom Sprinter Roof Rack

Roambuilt roof racks are another highly custom roof rack fabricator. When purchasing any of their racks you will be required to take measurements of openings for roof vents or air conditioners so they can make the necessary adjustment of the roof rack.

They have eight different roof rack configurations available and range in price from $3,900 – $10,000 plus shipping. Their lead time is anywhere from a few days up to eight weeks. For more info, pictures, and contact information visit: https://roambuilt.com/collections/all/roof-racks

SHOP ELECTRICAL SYSTEMS NOW

The EXPLORIST.life shop has everything you need for  your DIY camper electrical upgrade, retrofit, or complete system.

STAY UPDATED

Subscribe to the EXPLORIST.life weekly newsletter for updates, events, new tutorials & more oppourtunities.

SHOP ELECTRICAL SYSTEMS NOW

The EXPLORIST.life shop has everything you need for  your DIY camper electrical upgrade, retrofit, or complete system.

18 Responses

  1. I am grateful for your info. Do you have any contact info for reputable people that install racks. It is kind of frightening to think of just anyone drilling into a Mercedes Sprinter van!

  2. Nate,

    Thanks for this info. I have a partially redundant question. Your fan placement under the solar panels is very intriguing. What model fan and solar panels do you have? Did you have to modify the rack or do anything else crazy to pull this off? Thanks!
    Joel

    1. That’s a Maxxair Fan and the panels are 165W NewPowa Panels in our personal camper van; but any panels could be used. The roof rack just needs to be tall enough to clear the top of the fans. The roof rack did not need to be modified but was a custom rack from Aluminess.

      1. So do your Maxxfans fully open or do they have to stop at a partial open position before hitting panels? Do you have any drawings, design details, or notes from your dealings with Aluminess indicating how they had to modify their base template design?

        Cheers,

        1. They open all the way. I don’t have any plans or anything from Aluminess, but you should just be able to call them and discuss what you are trying to accomplish and see how they can accommodate. I wish I had more plans, and I will in the future, but I just simply don’t have them available currently.

  3. Hi Nate,
    Looks like you haven’t received or answered any comments here since late 2019, so not sure if you’re still responding. looking for best option for a 23′ Sprinter roof rack where the roof is already covered with: AC Unit, Winegard antenna, Fan opening and 2 solar panels.

  4. Nate, maybe you or your viewers might know. Will be putting a SMB Penthouse top on a Low Roof 144 4×4. Want to mount the solar to the SMB roof but don’t like the extra-high Alumines rack that goes on the SMB Penthouse. Looking for a rack that basically surrounds the penthouse pop-top (hides it), carries the awning and maybe offers up another solar option up front on the roof. Ever seen one?

  5. Nate, it looks as if your roof rack sits high enough that your solar panels do not interfere with the opening of the MaxxFan Deluxe… is that true? Can you open the vent all the way? I understand that the fan opens up to stand a tad less than 10″ high, which seems like a a lot of height for the rack. If that is indeed how high they are, have you noticed any negative effects, such as increased wind resistance or reduced gas mileage?

    Thank you for your wonderful build posts – they are truly inspirational, as well as a wealth of information for those wishing to follow in your footsteps. 🙂

    1. The roof rack does, indeed sit high enough to clear the vent fans. I don’t know how much MPG is lost, but we have a 3 year average of 15mpg. But… if we were worried about miles per gallon; we’d buy a tesla and not a 8000lb diesel-powered billboard. 😀 😀

    1. I hadn’t seen that one before today; but it looks like a decent option as well. IMO, it looks a little to ‘utility’ to me from an asthetic standpoint; but it’s marketed as such, so if that’s the look you’re going for, it seems like a good choice.

  6. Wow. Thanks for the info. Yakima sounds great and has a better price tag to it. . I love the slots to allow flexibility to attach items to it.

Leave a Reply

Your email address will not be published. Required fields are marked *